| Model ID |
VM101 |
VM102 |
| Model NO. |
NM-EJM3E |
NM-EJM4E |
| PCB dimensions |
L50mm×W50mm ～L330mm×W250mm（Single-lane） |
| Electric source |
3-phase AC 200，220，380，400，420，480 V |
| 1.3kVA |
| Pneumatic source |
0.5 ～0.8 Mpa |
| 100 L/min（A.N.R) |
200 L/min（A.N.R) |
| Dimensions※1 |
W830mm※2×D1969mm※3×H1500mm |
W1515mm×D2070mm※3×H1500mm |
| Mass |
1 500kg（Front:Fixed supply unit,Rear:Fixed supply unit without cutting unit） |
1 910kg（Front:Fixed supply unit plus tray,Rear:Fixed supply unit without cutting unit） |
| Component supply |
Taping |
Tape： 4 ～56/72/88/104mm |
| 20-slot fixed supply unit specifications,Max.80 components(4/8mm tape) |
20-slot fixed supply unit specifications,Max.160 components(4/8mm tape) |
| Stick |
Max.20 ※4 |
Max.40 ※4 |
| Tray |
Max.20 |
Max.20 |
| Model ID |
VM101 |
VM102 |
| Placement head |
Lightweight 16-nozzle head V2 |
Lightweight 8-nozzle head |
4-nozzle head |
14-nozzle head |
| Max.speed※5 |
42 000 cph（0.086 s/chip) |
21 500 cph（0.167 s/chip) |
7 500 cph（0.480 s/chip)
6 500 cph（0.554 s/QFP) |
32 100cph（0.112s/chip)
10 500cph（0.343s/QFP) |
| Placement accuracy （Cpk≥1） |
±30μm/chip |
±30μm/chip
±50μm/QFP 匚12mm Under
±30μm/QFP 匚12mm～ |
±30μm/QFP |
±40μm/chip
±50μm/QFP 匚12mm Under
±30μm/QFP 匚12mm～ |
| Component dimensions(mm) |
0402chip～L6×W6×T3 |
0402chip～
L45×W45×T12
or L100×W40×T12 |
0603chip～
L120×W90×T30
or L150×W25×T30 |
0402chip～
L120×W90×T28
or L150×W25×T28 |
※Placement tact time and accuracy values may differ slightly depending on conditions.
※Please refer to the specification booklet for details.
※1：The machine dimensions differ depending on specifications.※Please refer to the specification booklet.
※2：For the safety of transport openings,you need to seclect extension conveyor specifications for any VM101 located at the far right/left of a line.
※3：The dimensions of VM101 with the fixed supply unit selected for its front and rear sides are the same as the ones of VM102 with the tray feeder and the fixed supply unit selected for its front and rear sides,respectively.The reel holder and reel box are not included in the dimensions.
※4：The number of stick model types available for the machine equipped with the single stick feeder.
※5：The results obtained under optimal conditions set by us.※The takt time may differ depending on conditons.※Please refer to the specification booklet for details.
|
