| Model ID |
AM100 |
| Model No. |
NM-EJM4D |
| PCB dimensions |
L50mm×W50mm～L510mm×W460mm |
| Placement speed |
35 800 cph（0.1006s/chip)、12 200 cph（0.295s/QFP 匚12mm or less ) |
| Placement accuracy（Cpk≥1） |
±40μm/chip
±50μm/QFP 匚12mmor less
±30μm/QFP 匚12mm～匚32mm |
| Component supply |
Taping |
Tape：4 ～56/72/88/104mm |
Tape feeder specification：Max.160
Tray feeder specification：Max.120※1 |
（Tape：4/8 mm tape（small reel）） |
| Stick |
Tape feeder specification：Max.40
Tray feeder specification：Max.30※1 |
（Single stick feeder） |
| Tray |
Tray feeder specification：Max.20※1
Manually setting tray specification：Max.20※2（Option for the fixed feeder base） |
| Component dimensions |
0402chip※3～L120mm×W90mm或L150mm×W25mm（T=28※4） |
| PCB exchange time |
4.0 s（Where there is no placement component on the rear side） |
| Electric source |
3-phase AC200/220V±10V、AC380/400/420/480V±20V 2.0 Kva |
| Pneumatic source |
Min.0.5 Mpa～Max.0.8 Mpa、200L/min（A.N.R.) |
| Dimensions |
W1 970mm×D2 019mm※5×H1 500mm※6 |
| Mass |
2 650kg※7 |
※Placement tact time and accuracy values may differ slightly depending on conditions.
※Please refer to the specification booklet for details.
※1：In case of Single tray
※2：When installed on both sides of the rear fixed feeder base.
※3：The 0402 chip requires a specific nozzle/feeder,0402 mounting compatibility is optional.
※4：For components with a height of 25 mm or more, a dedicated nozzle is required.
※5：The D measurement indicateds the size of the machine with the fixed feeder bases in the front and rear.For front and rear feeder cart specifications,D measures 2282 mm and, with the tray feeder connected(front side:fixed feeder base),2105 mm.
※6：The signal tower and touch panel are not included.
※7：The machine body plus 4 fixed feeder bases (varies depending on the machine layout).
|
