| Model ID |
NPM-DX |
PCB dimensions
※when the long spec.conveyor is selected |
Single-lane mode |
L50mm×W50mm ～L510mm×W590mm |
| Dual-lane mode |
L50mm×W50mm ～L510mm×W300mm |
PCB exchange time
※when the short spec.conveyor is selected | 2.1s（L275mm or less）
4.8s（L275mm or over toL460mm or less）※May differ depending on PCB specifications. |
| Electric source |
3-phase AC 200，220，380，400，420，480 V 5.0kVA |
| Pneumatic source ※1 |
Min.0.5 Mpa、200 L/min （A.N.R) |
| Dimensions |
W1665mm※2×D2570mm※3×H1444mm※4 |
| Mass |
3600kg（Only for main body:This differs depending on the option configuration.） |
| Placement head |
Lightweight 16-nozzle head V2（Per haead） |
Lightweight 8-nozzle head （Per haead） |
4-nozzle head V2（Per haead） |
| Max.speed |
46 200 cph（0.078 s/chip) |
24 000 cph（0.150 s/chip) |
8 500 cph（0.424 s/chip)
8 000 cph（0.450 s/QFP) |
| Placement accuracy（Cpk≥1） |
±25μm/Square chip |
±25μm/Square chip
±40μm/QFP 匚12mm Under
±25μm/QFP 匚12mmto匚32mm |
±20μm/QFP |
| Component dimensions(mm） |
0201component※5※6/03015component※5
0402component※5～L6×W6×T3 |
0402component※5～L45×W45 OR
L100×W40×T12 |
0603chip～L120×W90 OR
L150×W25×T30 |
| Component supply |
Taping |
Tape：4/8/12/16/24/32/44/56mm |
Tape： 4 ～56/72/88/104mm |
| 4、8mm tape：Max.136 |
| Stick |
Max.32(Single stick feeder） |
