SHANGHAI YISHI TRADING CO.,LTD.

Model ID		NPM-WX	NPM-WXS
PCB dimensions	Single-lane mode	Batch mounting：L50mm×W50mm ～L750mm×W610mm 2-positin mounting：L50mm×W50mm ～L350mm×W610mm
	Dual-lane mode	Dual transfer（Batch）：L50mm×W50mm ～L750mm×W300mm Dual transfer（2-positin）：L50mm×W50mm ～L350mm×W300mm
		Single transfer（Batch）：L50mm×W50mm ～L750mm×W590mm Single transfer（2-positin）：L50mm×W50mm ～L350mm×W590mm
Electric source		3-phase AC 200，220，380，400，420，480 V 3.0kVA	3-phase AC 200，220，380，400，420，480 V 2.1kVA
Pneumatic source ※1		Min.0.5 Mpa、200 L/min （A.N.R)
Dimensions		W1410mm※2×D2570mm※3×H1444mm※4
Mass		2 740kg（Only for main body:This differs depending on the option configuration）	2 660kg（Only for main body:This differs depending on the option configuration）
Placement head		1 head on each side(front,rear)	1head (rear camera is optional)
Component supply	Taping	Tape： 4 ～56/72/88/104mm
		Front rear 17-slot feeder cart specifications：Max.136 product types(4,8mm tape）
	Stick	Front rear 17-slot feeder cart specifications：Max.32 product types(single stick feeder)	Front rear 17-slot feeder cart specifications：Max.16 product types※5(single stick feeder）
	Tray	One side tray specifications：Max.24、Front-rear tray specifications：Max.48

Placement head	Lightweight 16-nozzle head V2（Per head）	Lightweight 8-nozzle head（Per head）	4-nozzle head（Per head）	3-nozzle head V2（Per head）
Max.speed	43 000 cph （0.084 s/chip)	23 000 cph （0.155 s/chip)	8 400 cph （0.429 s/chip) 7 800 cph （0.462 s/QFP feeder) 7 100 cph （0.507 s/QFP tray)※8	9 400cph （0.383 s/chip) 7 300cph （0.493 s/QFP feeder) 6 350cph （0.567 s/QFP tray)※9
Placement accuracy （Cpk≥1）	±25μm/chip	±25μm/chip ±40μm/QFP 匚 12mm Under ±25μm/QFP 匚 12mm～匚32mm	±20μm/QFP	±20μm/QFP
Component dimensions(mm)	0201chip※6※7/ 03015chip※6 0402chip※6～L6×W6×T3	0402chip※6～ L45×W45×T12 or L100×W40×T12	0603chip～ L120×W90×T40 or L150×W25×T40	0603chip～ L120×W90×T40 or L150×W25×T40

※1：Only for main body
※2：2 010 mm in width if extension conveyors (300 mm) are placed on both sides.
※3：Dimension D including feeder cart
※4：Excluding the monitor,signal tower and ceiling fan cover.
※5：Stick feeders cannot be used on the rear feeder cart of NPM-WXS.
※6：0201/03015/0402 component requires a specific nozzle/tape feeder.
※7：0201 component placement is optional.(Under conditions specified by Panasonic)
※8：For any QFP 匚20mm or less in size
※9：For any QFP 匚28mm or less in size