|
|
 |
 |
Product features |
| 10 sec for the total printing process including transfer,recognition,each-time cleaning. The printing process matching your production style is realized by PCB discrimination function M2M Line solution. |
|
|
Realizing high-speed printing (10sec/PCB) and stable quality
Realizing the high-speed printing, eliminating a screen printer becomes bottleneck of operation and the stable quality by each-time cleaning.
<Realizing cycle time 10sec/PCB>
• New development : Self-propelled cleaning unit
• 3 Conveyors
• Hybrid squeegee head |
PCB discrimination function
To establish a printing process according to your production style.
• Single Spec
• 1 to 2 Spec
• 2 in 1 Spec
• Dual Spec |
M2M Line solution
According to the correction data of shifted printing positions analyzed by solder paste inspection (APC correction data) , it corrects printing positions (X ,Y ,θ) .
*3D inspection equipment of other companies can also be connected.
Connect with upper system (LNB,LWS…)
• Automatic changeover
• Component verification (solder/mask/squeegee…)
• Trace data output
*About the specification and system configuration, please refer to the “Specification" for details. |
|
 |
| Model ID |
SPV
(Single Spec) |
SPV
(1 to 2 Spec) |
SPV
(2 in 1 Spec) |
SPV
(Dual Spec) |
| Model No. |
NM-EJP7A |
NM-EJP7A
(Main machine)
NM-EJP8A
(Back side machine) |
| PCB dimensions (mm) |
L 50 x W 50 to L 350 x W 300
(Max. dimensions of 1 to 2 Spec : L 350 x W 165) |
| PCB exchange time*1 |
10.0 s Including transfer, positioning, recognition, each-time cleaning.
Printing & cleaning conditions : Our recommended conditions (PCB dimensions L 250 x W 165 ) * Except 1 to 2 Spec |
| Repeatability |
2 Cpk ± 5.0 μm 6 σ The repeatability of same PCB
Equal to ± 5.0 μm ± 3 σ (or ±2.5 μm ±1.5 σ) |
| Screen frame dimensions (mm) |
L 736 x W 736, L 650 x W 550, L 550 x W 650, L 750 x W 750, L 584 x W 584*2 |
| PCB discrimination function |
Pre-process |
Not |
Not |
Installed |
Not |
| Post-process |
Not |
Installed |
Installed |
Installed |
| Electric source*3 |
1-phase AC 200, 220, 230, 240 V ±10V
Max. 2.0 kVA |
1-phase AC 200, 220, 230, 240 V ±10V
Max. 4.0 kVA |
| Pneumatic source |
0.5 MPa |
0.5 MPa |
Mask cleaning suction :
blower spec*4 |
280 L/min (A.N.R.) |
560 L/min (A.N.R.) |
Mask cleaning suction :
ejector spec*4 |
380 L/min (A.N.R.) |
760 L/min (A.N.R.) |
| Dimensions (mm)*5 |
W 1 650 x D 1 517 x H 1 500 |
W 1 650 x D 3 044 x H 1 500 |
| Mass*6 |
1 550 kg |
1 550 kg (Main) +
1 450 kg (Back side) | |
*1 : PCB exchange time varies depending on the machine in the pre-process and the post process, the PCB size, the use of a PCB pressing-down unit and so forth.
*2 : For mask specifications, please see the specification.
*3 : Including blower and vacuum pump"Option"
*4 : When using the mask suction function
*5 : Except for the signal tower and the touch panel.
*6 : With full options
*Values such as cycle time and accuracy may vary depending on operating conditions.
*Please refer to the ‘‘Specification” booklet for details. |
|
